Back

BLAST FREEZER (068ai)

Price (excl GST): $2,500



Length: 3200+770

Width: 2140

Height: 2780

Motor: 3ph

Condition: reasonable

Location: New Zealand

This skid mounted, blast freezer is divided into two compartments, 1400mm x 1850mm x 1670mm high and 1200mm x 1850mm x 2400mm high. It was powered by an 11.4kW, 1430rpm Bitzer compressor with water cooled condenser mounted on one end. This needs to be replaced. The end wall mounted fan is 800mm diameter and has ten blades which blow air through the product and evaporator and the air recycles over the top. The evaporator located in between the two doors is 1430mm wide x 1380mm high. The 2 entrance doors are 920mm wide x 1640mm high. The freezer has galvanised iron walls inside and out. The roof cap should also be replaced as well as the door hinge pins but according to the owner the panels, fan and evaporator are in good condition. The skid needs a repaint. Comes complete with temperature gauge and thermostat. It requires a starter. Was transported to remote locations to service hunters and fishermen.

- 47 Windsor Street, Palmerston North
Home | About | How We Operate | Specials | Contact